Blog

What is the markup on blinds? How dealers set retail from the supplier list

Markup is not the same as margin. Here is the arithmetic, the published figures we could cite, and how to apply a markup to a price grid.

10 November 2026

If you sell made-to-measure blinds, the retail price almost always starts from a cell in a supplier grid. The customer gives you a width and a drop, you find the band those sizes fall into, and you read a trade price. The part that decides whether the job is worth doing is what you do with that cell.

People type "what is the markup on blinds" into Google as if there is a standard multiplier. There isn't an official one.

Markup and margin are not the same number

Markup is what you add to cost, as a share of cost. Margin is what you keep, as a share of the selling price:

  • Markup % = (selling price − cost) ÷ cost
  • Margin % = (selling price − cost) ÷ selling price

Take a shade that costs you £100 landed, using a round figure only to show the maths. A 50% markup makes the selling price £150. Your gross profit is £50, which is 33.3% of what you collected, not 50%.

Sun Glow, a Canadian window-covering manufacturer, published this conversion in August 2026:

Markup on costGross margin
50%33.3%
100% (2× cost)50.0%
150% (2.5× cost)60.0%
200% (3× cost)66.7%

To hold a 50% gross margin you need to double your cost. Pick one language and use it in quotes, in your books and on any website calculator, or the numbers will drift.

Is there a standard markup on custom blinds?

Sun Glow's own FAQ on that page is the honest answer: there is no reliable published average. A shop with a lease and a showroom has to recover different costs from a solo installer in a van. What we could find, and can cite, is advice from individual firms, not a trade-body survey.

Exciting Windows, a US window-treatment company, published in June 2022 that dealers should aim for a 2.5× to 3× cost multiplier, and, separately, for a 55% to 60% gross profit margin. That is the firm's view of what supports operating costs, not a measured industry average. (2.5× is a 60% margin; 3× is about 67%.)

One California dealer, 818 Shutters & Shades, published a breakdown in August 2026 for a sample project of ten custom roller shades. For a local independent, they put manufacturer wholesale at 25% to 35% of the finished customer ticket, with installation, overhead and the owner's pay making up the rest. That is the product's share of the whole job, not a multiplier you apply to the cell.

Use those figures as a sense-check, not a rule. If you are supply-only, or you already add labour as a separate line, a lower product multiplier can still be fine. Your overhead per job is the number nobody else can give you: last year's operating expenses (everything that is not product cost or install labour) divided by the jobs you completed.

Start from landed cost, not the cell alone

The cell in the grid is rarely your true cost. Freight, duty and packaging sit on top of it. If you apply a tidy 2.5× to the cell and then pay shipping on a small order, the real margin is lower than the spreadsheet says.

Labour is a separate problem. The measure visit, the drive and the install do not appear on the supplier invoice. Some dealers fold a share of that into the product price; others add a fitting charge or a minimum job value. What does not work is a product-only markup that assumes the visit is free.

Discounts eat margin faster than they look. Sun Glow's arithmetic: at a 40% gross margin, 10% off the selling price needs about a third more volume just to stand still. Do that sum on your actual margin before you advertise a sale.

A worked example on a width × drop grid

The figures below are made up, not a recommended price.

Example trade grid, prices before tax, millimetres, width across the top:

Drop (mm)6009001200
800404856
1200465564
1600526272

A customer wants 850 mm wide by 1100 mm drop. Supplier grids almost never price every millimetre. A size between two bands is charged at the next band up, on each axis on its own. 850 sits above 600 and not above 900, so the width band is 900. 1100 sits above 800 and not above 1200, so the drop band is 1200. The trade cell is 55.

Now apply markup, still before tax:

  • 2× (100% markup, 50% margin): 110
  • 2.5× (150% markup, 60% margin): 137.50
  • 3× (200% markup, 66.7% margin): 165

Same window, same fabric, three different retail prices, and the only change was the multiplier. If you also charge to fit, add that as its own line.

You can set different multipliers on different fabric groups: a busy plain roller often cannot carry the same markup as a specialist fabric. If those prices go on a website, the calculator has to use the same multiplier you would have used by hand. In Glasstally you can set markup as a multiplier or as a margin, as a default or per fabric group.

Rounding the size and rounding the price are different jobs

Rounding the customer's width and drop up to the next band is a supplier rule. Rounding the finished retail price is yours.

Once you have trade price × markup, you may want the figure the customer sees to be a whole pound or dollar, to end in .50, or to end in .95. Do that after markup, and after you have decided how tax is shown. If you round first and then add VAT, you will not match a price that was rounded last.

Keep the order the same on every quote: band the size, read the cell, apply markup, apply tax the way your market expects, then round.

VAT and sales tax change what the customer sees

In the UK, the standard VAT rate is 20%, and it applies to most goods and services unless a specific relief applies. If your supplier list is ex VAT, a 2.5× markup on a £55 cell is £137.50 ex VAT, or £165 inc VAT at 20%. If the list is already inc VAT and you treat it as ex VAT, every price on the site will be wrong.

In the US and Canada there is no single national rate. Sales tax varies by state, province and often by locality. Many shops show the product price before sales tax and say so next to the figure. The calculator and the PDF quote have to say the same thing.

A website price will not fix an under-cooked markup. It will only show that markup, consistently, at the size the customer typed. We built Glasstally so the figure starts from the same cell you would have looked up, then applies the markup, tax and rounding you set. You can click a customer price and see the file and the cell behind it. Upload and check one list free. Publishing needs a plan (Standard is £59 a month plus VAT, or Founder is £117 plus VAT every three months), with a 30-day refund if we cannot load your lists.

Frequently asked questions

What is a typical markup on custom blinds?

There is no official average. One window-treatment firm has published a target of 2.5× to 3× cost, which is a 60% to 67% gross margin. A manufacturer in the same trade says you should work the number from your own landed cost, labour and overhead.

Is a 50% markup the same as a 50% margin?

No. A 50% markup on £100 is a £150 selling price and a 33.3% margin. A 50% margin on £100 cost is a £200 selling price, which is a 100% markup.

Do I apply markup before or after VAT?

Apply markup to the trade price in the same tax state as the list (inc or ex VAT). Then show the customer price the way your market expects: in the UK that is often inc VAT, in the US and Canada it is often before sales tax.

All articles